We also design laser manufacturing cells or cells for laser processing. As laser safety experts, at PCL we do not just put in some plates, whatever the laser, head focal length or application characteristics, we first assess the risks of your application configuration. Our team is made up of LSOs who will analyze the specific case with its specific circumstances in order to provide the most appropriate solution, always with laser protection as the first objective.
So if you just want a quick and cheap solution to get out of the way we will not be a good supplier for you because we are a good supplier of laser protection booths. If you want a job well done and with guaranteed laser safety then we are what you need.
At PCL we have different panels and materials to suit the need, and therefore the price to pay, in each case. The laser power, the focal length of the head or the distance to walls or ceiling will dictate the need for one material or another.
And as required by the regulations, if necessary, we can test the material with your laser.
Our LaserKubik™ laser safety and security cabins are fully customizable and can be equipped with the following elements, among others:
- openable roof
- different types of doors: hinged, sliding, motorized,...
- laser protection windows or CCTV system
- different openings and ducts (for ventilation, cable glands or others) protected by mailboxes and labyrinths
- safety interlock
With the power lasers reach (and rising), be aware that your application may require an active laser protection cabin: sensors automatically dismantle the laser if the laser beam reaches the walls or ceiling of the booth. They are expensive but sometimes the only option, especially if there is no monitoring of the laser process.
A passive laser safety cabin does not require (any?) maintenance, but active ones do: if one of the sensors is activated, it is necessary to replace it and it is therefore advisable to stock spare parts.
And finally, when the cabin is assembled and the laser system is working, PCL can make the report for the certification according to IEC (UNE-EN) 60825-4.
Remember that a 60825 certification is granted for a specific laser (or lasers) inside it. If you change the lasers (different wavelength, CW-pulsed operation mode, increase of power, ...) you will have to check again the validity of the cabin and in positive case re-certify it.
Why LaserKubik™?
End users, engineering and construction companies that have to realize complete workstations or cells with laser processes choose ProCareLight and LaserKubik™ because
- we are a team of Laser Safety Officers (LSO). We know the regulations and make the right calculations for each geometry and laser system and provide real and proven laser protection solutions.
- we perform pre-studies and in-situ measurements to ensure that the construction is carried out as planned
- we do not have one only panel for everything, no matter if it does not meet safety requirements or if it is oversized for the application. We have different materials to suit each case.
How can a simple aluminum plate of a few mm withstand KW lasers designed to cut steel and other more resistant metals?
- we know how to carry out the measurements and issue the reports for the certification of the cabinets.
- and above all because they value a job well done over the cheapest proposal (which is unlikely to be ours).
If you prefer a cheap solution, at least charge us for the safety report to sleep more peacefully.
If what you need is a small cell for your optical table or industrial process, see our small laser protection enclosures..
As laser safety experts, at PCL we know the right products better than anyone else and we are the distributors of leading manufacturers of PPE and laser protection such as Protect Laserschutz, Laservision or Univet. We have the best catalog to be able to offer you what you really need.
More information: ventas@procarelight.com / +34 605 024 420
All our laser protection and safety products and services:
- goggles and helmets
- windows
- curtains and barriers
- cabins and enclosures
- clothing
- services: advice and consultancy
- training courses
If you work with lasers, you might be interested in our laser power & energy sensors/meters.
