Both the average power and the energy of each shot of an IPL (Intense Pulsed Light) source must be measured periodically to ensure proper operation and avoid burns on the skin of the treatment recipient.

We provide users, medical and aesthetic centers, repair and maintenance services and manufacturers of medical- aesthetic devices with an IPL meter, which although it is inexpensive, it cannot be called low cost. Well, or yes, I don't know.

Key features of the IPL Power and Energy Sensor MLP-Fit-IPL-R:
- Power range: 1 W to 100 W
- Energy range: 3.5 J to 350 J
- Máx. power density @ 1064 nm: 10.000 W/cm²
- Repeatability in accuracy (W/J): ± 1 /3 %
- Absolute accuracy: ± 3 %
- Delivered with test report. Optional NIST/PTB traceable calibration certificate
- Cost-effective and compact

Dimensions of the MLP-Fit-IPL-R:
Sensor aperture: 18 mm x 60 mm
Sensor head: 60 x 100 x 26 mm³
Control and display: 95 x 71 x 46 mm³

IPL meter models and options, all with the same optical sensor but different connections:
1) MLP-Fit-IPL-R:
- handheld probe attached to the control electronics and display by a cable, with the dimensions indicated above.
- ideal for maintenance technicians and device owners.

2) MLP-Fit-IPL-R-H
- sensor without display and control for connection to external MLP-Plus-2 meter (also valid for laser sensors)
- ideal for repair centers or manufacturers who also have laser machines.

3) MLP-Fit-IPL-R-H-U
- sensor without display and control for connection via USB to PC or similar
- so a little bit for everybody

Optionally if you need standardized measurements to the surface unit we offer 1cm2 surface plates in two formats:
- MLP-FluencePlate-1x1: fluence probe with 1 cm x 1 cm aperture
- MLP-FluencePlate-2x0.5: fluence probe  with 2 cm x 0.5 cm aperture

Please note, these sensors are NOT valid for measuring lasers. Most likely the sensor will burn out and although it may continue to function outside the burned area, it cannot be recalibrated and the IPL power and energy sensor will have to be replaced.

All these products have a 3-year warranty.
At PCL we are the LaserPoint distributors in Portugal and Spain.

If you work with lasers in addition to IPL, do not forget to consult our sections:
- laser protection products: goggles, windows, barriers, curtains, cabins, clothing
- consultancy and additionally training in laser safety
- laser power and energy measurement

More information: ventas@procarelight.com / +34 605 024 420