ps pulsed MOPA Lampo
- 1064, 532, 266 nm
- max pulse energy: 150 uJ; max avg. power: 20 W
- pulse duration <70 ps; PRR up to 40 MHz
- MOPA
We offer the LBS-LO MOPA picosecond (ps) pulsed laser for research (R&D) applications and laboratory use, but above all, given its connectivity, size and low power consumption, for industrial integration as an OEM. Some relevant features of this ultrafast laser are:
- < 70ps
- 50kHz to 40MHz
- External trigger
- 1064, 532, 266 nm
- M2 < 1.5
- Compact monolithic case
Bright Solutions is glad to introduce Lampo, the new family of compact ultrafast lasers generating high peak power ps laser pulses at a repetition rate selectable over a wide frequency range, externally triggerable from 50 kHz to 40 MHz.
The pulses emitted by Lampo have a duration of few tens of picoseconds, with MegaWatt-level peak power, and wavelengths ranging from IR (1064 nm) to deep UV (266 nm).
Pursuing the all-in-one philosophy of most of Bright Solutions industrial and airborne lasers, Lampo is built in a rugged single-unit laser head including the monolithic optical section as well as power and signal electronics.
Specifications and models of the LBS-NS DPSS narrowband picosecond (ps) pulsed lasers:
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
|
|
|
||
Options available for the LBS-NS family of narrowband DPSS ps lasers:
- Custom amplified models
- Beam expanding and collimating optics
- Circular polarization
- custom tunable solutions (0.7 to 3 μm)
- Remote control cbox and software interface
- AC-DC power supply
Key applications of these picosecond ultrafast lasers:
- Specialty marking
- Micromachining
- OLED Microelectronics
- LiDAR
- Spectroscopy
- Scientific
In the following table you can see our most common models of ultrafast picosecond pulsed lasers, with their maximum pulse energy and average power values for each emission wavelength.
| Nps | Lampo | Microchip | ||
| LBS-NS | LBS-LO | LBS-MP | ||
| Pulse Energy / Avg. Power (uJ/W, max) | 0.7-3 um | custom tunable | ||
| 1064 | -/10 | 150/20 | 2/0.11 | |
| 532 | -/5 | 80/5 | 0.3/0.0165 | |
| 355 | -/1 | avail. | ||
| 266 | 20/1 | avail. | ||
| Rep. Rate | (MHz) | up to 80 | 0.05-40 | up 0.1 |
| Pulse, ps | (1064nm) | <8 | <70 | <400 |
| Other | Line <100 pm | MOPA | Chip |
These are bright solutions for ps laser applications, but they are not the only ones available.
Our picosecond lasers are not low cost but are economical, cost-effective models for their high performance.
Here you can also see our picosecond (and femtosecond) supercontinuum (SC) lasers.
Don't forget that if you have or need a laser, you may very well need our PCL services:
- laser safety training
- laser safety consultancy
Or maybe our laser related products:
- laser protection products: goggles & helmets, windows, barriers, curtains, cabins, clothing
- Blink: laser power and energy meter, each pulse, for ultrafast laser up to 1 MHz
- Blueback: Spider based ultrafast laser pulse characterization
- laser beam profile analysis
- spectrometers
More information: ventas@procarelight.com / +34 605 024 420
Related products
